bedroom built ins

DIY Guide: How to Install Bedroom Built-Ins for Optimal Storage and Organization

Are you looking to maximize storage and organization in your bedroom? Introducing bedroom built-ins could be the solution you need! Not only do they provide ample space for all your belongings, but they can also add a touch of elegance and customization to your bedroom.

From traditional built-in closets to modern shelving units, there are many different types of bedroom built-ins to consider. But where do you begin in planning and designing your new storage solution? And how do you ensure a successful installation?

In this article, we’ll guide you through everything you need to know about bedroom built-ins, including their benefits, different types to consider, planning and design tips, installation advice, and even how to incorporate them seamlessly into your existing decor. So, grab your tools and let’s get started!

bedroom built ins

An introduction to bedroom built-ins and their benefits.

If you’re a handyman who loves to fix and build things around the house, then bedroom built-ins should definitely be on your radar. These custom-made storage solutions offer numerous benefits that can not only make your life more organized but also add value to your home.

One of the primary advantages of bedroom built-ins is their ability to maximize space usage. With these fixtures, you can efficiently utilize every inch of available space in your room while keeping everything neat and tidy. From shelves and cabinets to drawers and hanging rods, bedroom built-ins offer endless possibilities for storing clothing, shoes, accessories, bedding – anything you need!

Another significant benefit of these storage solutions is their flexibility – they are fully customizable according to personal preferences as well as room design requirements. Whether it’s a small or large area or an oddly-shaped corner in the room that needs some attention; with proper planning and execution skills from a professional carpenter or builder like yourself; there’s always something possible for any situation.

Finally yet importantly: When it comes time for selling properties down-the-line perhaps years later after getting all those positive feedbacks from friends & family members praising how much easier life has been since installing them- Bedroom Built Ins will undoubtedly increase property values significantly.

In conclusion: If you’re looking for practical ways (and long-term investment opportunities) on how best manage limited spaces creatively while increasing property values at the same time? Then consider building out customized-bedroom-built ins today!

Different types of bedroom built-ins to be considered.

As a handyman who takes pride in fixing things around the house, you understand that storage solutions are crucial to keeping a bedroom organized and functional. But have you considered incorporating built-ins into your next project? Here are some different types of bedroom built-ins to consider:

1. Wardrobe Built-Ins: Traditional wardrobes take up valuable floor space and can be difficult to customize for specific needs. A wardrobe built-in solves both of these issues by utilizing the walls for storage space without sacrificing precious floor area.

2. Bookshelf Built-Ins: If you’re an avid reader or simply love displaying decorative items, bookshelf built-ins may be the perfect addition to your bedroom. These can be customized with adjustable shelving heights and sizes to fit everything from books and picture frames to plants.

3. Window Seat Built-Ins: Not only do window seat built-ins provide additional seating in a room, but they also offer extra storage underneath the cushioned seating area – perfect for blankets or pillows.

4. Closet Organizer Built-Ins: Take organization one step further by adding closet organizer built-ins such as drawers, shelves, hanging rods, shoe racks – all designed specifically for your clothes and accessories.

By incorporating any of these different types of bedroom-built ins into your next project will not only increase functionality but also add value and style to any home improvement endeavor!

How to plan and design built-in storage solutions for your bedroom?


If you’re a DIY handyman who loves to fix things around the house, planning and designing built-in storage solutions for your bedroom is a great way to maximize space and add value to your home. Here are some tips on how to get started:

1. Assess Your Needs: Before you begin any project, take stock of what items need storage in your bedroom. Do you have lots of clothes that need hanging space or do you want shelves for books or decorative items? Identifying what needs storage will help determine the best design options.

2. Plan Your Layout: Once you know what type of storage is needed, sketch out a rough layout plan on paper or use an online tool like SketchUp to visualize different configurations.

3. Consider Materials: Built-ins can be made from various materials including wood, MDF board, and metal brackets with wire shelving – each has its own benefits and drawbacks so choose wisely based on cost effectiveness vs durability vs aesthetics.

4. Think Outside the Box: Don’t limit yourself by thinking only wall-to-wall cabinets; consider creating custom closet spaces that fit into unused corners or even under beds!

5.Choose Hardware & Accessories Carefully- It’s important not just choosing hardware accessories but also their placement – this will affect ease-of-use as well as overall aesthetic appeal (think about where knobs should go – higher up if they’re meant for taller people).

By following these steps above when planning built-in solutions for your bedroom renovation project helps ensure success!

Tips for installing bedroom built-ins.

As a handyman, you know the importance of quality craftsmanship when it comes to installing bedroom built-ins. Here are some tips to ensure your installation goes smoothly and produces stunning results.

Firstly, measure twice and cut once. It may seem like an age-old adage, but taking accurate measurements before making any cuts is essential for creating a precise fit that will look seamless in your client’s bedroom.

Secondly, take into account the surrounding architecture of the room when designing your built-ins. You want to create something that fits seamlessly with both the aesthetics and practicalities of their space.

Thirdly, consider using high-quality materials such as hardwood or MDF instead of cheaper alternatives. Not only will this add value to the overall project but it also ensures durability and longevity for years down the line.

Fourthly, have all necessary tools at hand before starting work on any construction project – especially one as detailed as installing built-ins! This includes everything from drills and saws through screws or nails depending on what type of fasteners are needed for each specific part being installed.

Lastly – don’t forget about safety precautions! Make sure you wear protective gear while working with power tools like goggles or gloves so that accidents can be avoided during installation process!

By following these simple yet effective tips when installing bedroom built-ins you’ll be able to deliver superior craftsmanship every time- leaving clients satisfied with their new addition!

Incorporating built-ins into your existing bedroom décor.

Do you want to add some extra storage and style to your bedroom? Incorporating built-ins into your existing decor is a great way to achieve both.

First, assess the available space in your room. Do you have any nooks or alcoves that could be transformed into functional storage areas with built-ins? Consider also the placement of windows and doors, as these can affect the design and layout of your built-ins.

Next, think about what kind of items you need to store. Are they clothing items like shoes or accessories? Or are they books or electronics?

Once you have a clear idea of what needs to be stored, it’s time to get creative with the design. Built-ins come in many shapes and sizes – from simple shelves for displaying knick-knacks or books, all the way up to custom-made wardrobes complete with hanging rods and drawers.

If woodworking isn’t quite within your skillset but still wanting some customization beyond pre-built options at furniture stores (which may not fit perfectly), consider working with professional carpenters who can work on projects specifically tailored for unique spaces like yours!

Finally, don’t forget about aesthetics! Built-in cabinets can provide an opportunity for adding personality through paint colors (or even wallpaper) on their surfaces while glass panel doors offer a chance display prized possessions rather than hiding them away behind closed cabinet doors.

Incorporating built ins may seem daunting at first glance but by following these easy steps – assessing space availability; identifying needed storage features such as drawers vs hanging racks; brainstorming creative designs customized just right – creating additional functionality without sacrificing style will become effortless!


Installing bedroom built-ins can be a great way to add extra storage, improve your lifestyle, and increase the value of your home. With a bit of planning and some moderate DIY skills you can easily create custom built-in solutions that are perfect for any bedroom! So get out there and make something special – it’ll be worth the effort in the end. And don’t forget to check back here for more great tips on installing bedroom built-ins!